Gear Motor WPDO 100 1.5kW 2Hp

The WPDO Gear Motor 1.5kW 2Hp is a device belonging to the gear motor category, used to reduce rotational speed and increase output torque in transmission systems. Its structure consists of an electric motor combined with a size 100 worm gearbox, suitable for medium to heavy-load working environments.

Design overview of the WPDO Gear Motor 1.5kW 2Hp

The device is assembled from a 3-phase electric motor with a power of 1.5kW and a WPDO worm gear transmission. This product line is commonly used as a 3-phase gear motor in industrial systems, and can also be optionally configured as a 1-phase gear motor when using residential power supplies.

The housing is made of cast iron or aluminum alloy, ensuring rigidity and load-bearing capacity. The powder-coated surface helps minimize environmental impacts such as dust and moisture.

Detailed structure of the WPDO Gear Motor 1.5kW 2Hp

This section presents the main components constituting the device and the role of each detail.

3-Phase 1.5kW 2Hp Electric Motor:

• Stator: Consists of technical steel laminations assembled into a magnetic core, inside which insulated copper windings are placed. When powered, the rotating magnetic field generated in the stator creates a force that causes the rotor to rotate.
• Rotor: Squirrel-cage type, cast from aluminum or copper and tightly mounted on a steel shaft. The rotor rotates according to the stator’s magnetic field, transmitting mechanical motion to the shaft to drive the gearbox.
• Terminal box: The place where power wire ends converge, arranging terminal blocks and connectors for safe electrical connection while protecting joints from dust and moisture.

WPDO 100 Worm Gearbox:

• Worm shaft: Precisely machined from alloy steel, the thread surface is heat-treated to increase hardness and reduce wear during meshing with the worm gear. This shaft receives direct motion from the motor and transmits it into the gear system.
• Worm gear: The component meshing with the worm shaft, usually cast from brass to reduce friction and increase lifespan. When the worm shaft rotates, the worm gear rotates accordingly at a slower speed, generating greater torque.
• Oil seal: Installed at the input and output shaft positions, responsible for keeping internal lubricating oil sealed while preventing dust and water intrusion, helping increase durability for internal components.

Technical specifications of the WPDO Gear Motor 1.5kW 2Hp

This section provides basic parameters for selecting and installing the equipment.

Technical specifications of 3-phase 1.5kW 2Hp electric motor

The parameters below help determine the motor’s operating capability.

Technical specifications of WPDO 100 gearbox

These parameters relate to the transmission and load capacity of the gearbox.

Common applications of the WPDO Gear Motor 1.5kW 2Hp

As a gear motor from 1.1kW to 3.7kW, it is commonly used in the following applications:

• Conveyors in the food and industrial sectors: Used to drive continuous product transportation systems, ensuring stable and uniform speed on production lines.
• Presses and material mixing machines: Provide large torque to serve molding or raw material mixing processes in the plastics and building materials industries.
• Agricultural processing lines: Applied in milling, pelletizing, or animal feed mixing machines, helping increase productivity and reduce load for operators.
• Woodworking mechanical equipment: Used in cutting machines, planing machines, or feeding systems, ensuring stable traction and continuous operation.

Instructions for installing WPDO worm gearbox with 3-phase electric motor

Proper installation between the WPDO gearbox and the 3-phase electric motor helps the system operate stably, reduces vibration, and minimizes issues during use.

Step 1: Check components

Before proceeding with assembly, it is necessary to check the condition of the gearbox, motor, transmission shaft, keyway, and bolts. At the same time, clean the contact surfaces to avoid affecting installation accuracy.

Step 2: Confirm assembly parameters

Check the motor shaft diameter and the shaft hole size of the gearbox. Ensure that the flange, mounting position, and technical parameters are compatible with each other before connecting.

Step 3: Perform installation

Insert the motor shaft into the correct position on the gearbox. Align the key and keyway to engage completely, avoiding heavy force when components are not yet meshed. To easily follow the actual process, users can refer to the gear motor video guiding the detailed assembly and alignment steps.

Step 4: Secure and check operation

Tighten the bolts in a symmetrical sequence to distribute the force evenly. After completion, run the system without load for a short time to check stability, noise, and abnormal vibration phenomena.

In addition to installation instructions, users should check out the comprehensive video on operation, maintenance, and troubleshooting common errors to enhance the practical efficiency of using the gearbox.

Warranty, Shipping, and Commitment Policies at Thanh Thai Motor

When purchasing gearmotors at Thanh Thai Motor, you will receive benefits such as:

Warranty up to 24 Months

All gearmotor products at Thanh Thai Motor come with an official 24-month warranty. We are committed to clear after-sales service, with quick and transparent processing procedures – ensuring customer peace of mind during use.

Nationwide Delivery

No matter which province or city you are in, Thanh Thai Motor is always ready to support fast delivery, ensuring on-time delivery, careful packaging, and safe transportation. We supply a full range of 220V gearmotors, variable speed motors, etc., for the diverse needs of customers nationwide.

Products Meet European Quality Standards with German Technology

Our products are manufactured using modern German technology, meeting European standards. Models such as integrated gearmotors, variable speed motors, or 220V gearmotors all ensure stable operation and superior durability.

Competitive Pricing, Good Discounts for Dealers and Bulk Purchasers

We offer affordable gearmotors, suitable for projects with limited budgets. In addition, Thanh Thai Motor has special policies and offers for dealers and bulk purchasers.

Quality Commitment

All 220V gearmotors here are wound with pure copper wire. This ensures powerful, smooth operation and energy savings.

Full Certification Documents: CO, CQ,...

All products such as integrated gearmotors, conveyor motors, or speed reducers come with full Certificates of Origin (CO) and Quality (CQ), meeting stringent technical requirements in industry.

Contact Us

Need advice on choosing the right gearmotor for your needs? Contact Thanh Thai Motor immediately using the methods below:

• WhatsApp: +84966596219
• Email: codienthanhthai@gmail.com