WPDO 100 Gear Motor 1.1kW 1.5Hp

The WPDO 100 Gear Motor 1.1kW 1.5Hp is a gear motor equipment line. Its structure includes an electric motor assembled with a size 100 WPDO worm gearbox. The main function of the device is to reduce rotational speed and increase output torque. The device housing is cast iron, suitable for operating in medium to heavy-load industrial environments.

Design Overview of the WPDO 100 Gear Motor 1.1kW 1.5Hp

The worm gear motor features a unique design and powerful operating performance. It is a 3-phase gear motor assembled from a 3-phase electric motor coupled with a worm gearbox. The outer casing is made of sturdy cast iron or aluminum, combined with a powder-coated layer to protect the equipment from external harmful agents.

Detailed Structure of the WPDO 100 Gear Motor 1.1kW 1.5Hp

To understand the operating principle clearly, it is necessary to analyze each component that makes up the motor and gearbox assembly.

3-Phase Electric Motor 1.1kW 1.5Hp:

• Stator: A collection of slotted technical steel sheets assembled together, containing pure copper windings coated with insulation enamel. The system generates an alternating magnetic field when a 3-phase voltage is applied.
• Rotor: A steel squirrel-cage core pressed onto a carbon steel shaft. The rotor assembly is dynamically balanced to limit centrifugal errors when rotating under the influence of the magnetic field.
• Terminal box: Located on top of the motor, containing the terminal strip for connecting power supply wires to the stator windings.

WPDO 100 Worm Gearbox:

• Worm shaft: Machined from alloy steel, undergoing carbon penetration and thread surface heat treatment. The shaft is axially positioned by tapered roller bearings at both ends, directly receiving mechanical force from the motor.
• Worm gear: Gear rim cast from brass alloy with a cast iron core. The tooth profile is machined to mesh with the worm shaft threads to reduce speed and redirect the drive force by 90 degrees.
• Oil seal: Technical rubber rings placed at the input and output shaft positions, blocking liquid lubricant leakage from the inside and preventing dust debris from entering from the outside.

Technical Specifications of the WPDO 100 Gear Motor 1.1kW 1.5Hp

This section provides quantitative information to help users select and install suitable equipment.

Technical Specifications of the 3-Phase Electric Motor 1.1kW 1.5Hp

The basic parameters of the motor help determine operational capability and assembly compatibility.

Technical Specifications of the WPDO 100 Worm Gearbox

Information about the gearbox helps evaluate the load capacity and speed reduction ratio of the equipment.

Common Applications of the WPDO 100 Gear Motor 1.1kW 1.5Hp

The WPDO 100 Gear Motor 1.1kW 1.5Hp has many popular applications, satisfying customers and being widely used in the market today:

• Widely used in rice milling plants, glassware manufacturing plants, and plastics production.
• Used in wood pressing and sugar pressing plants.
• In conveyor systems for food production and animal feed manufacturing plants.

Guide to Installing the WPDO Worm Gearbox with a 3-Phase Electric Motor

Proper installation between the WPDO gearbox and the 3-phase electric motor helps the system operate stably, reduces vibration, and minimizes incidents during use.

Step 1: Inspect components

Before proceeding with assembly, it is necessary to check the condition of the gearbox, motor, drive shaft, keyway, and bolts. Simultaneously, clean the contact surfaces to avoid affecting installation accuracy.

Step 2: Confirm assembly parameters

Check the motor shaft diameter and the shaft bore size of the gearbox. Ensure that the flange, mounting position, and technical parameters are compatible with each other before connecting.

Step 3: Perform installation

Insert the motor shaft into the correct position on the gearbox. Align the key and keyway so that they mesh completely, avoiding excessive force when components are not yet meshed. Users can refer to the gear motor video to observe detailed steps of actual assembly and alignment.

Step 4: Secure and test operation

Tighten the bolts in a symmetrical sequence to distribute the force evenly. After completion, run the system at no-load for a short time to check stability, noise levels, and abnormal vibration phenomena.

In addition, watching the comprehensive video on gearbox installation and maintenance methods will help users gain more experience in handling situations arising during operation.

Warranty, Shipping, and Commitment Policies at Thanh Thai Motor

When purchasing gearmotors at Thanh Thai Motor, you will receive benefits such as:

Warranty up to 24 Months

All gearmotor products at Thanh Thai Motor come with an official 24-month warranty. We are committed to clear after-sales service, with quick and transparent processing procedures – ensuring customer peace of mind during use.

Nationwide Delivery

No matter which province or city you are in, Thanh Thai Motor is always ready to support fast delivery, ensuring on-time delivery, careful packaging, and safe transportation. We supply a full range of 220V gearmotors, variable speed motors, etc., for the diverse needs of customers nationwide.

Products Meet European Quality Standards with German Technology

Our products are manufactured using modern German technology, meeting European standards. Models such as integrated gearmotors, variable speed motors, or 220V gearmotors all ensure stable operation and superior durability.

Competitive Pricing, Good Discounts for Dealers and Bulk Purchasers

We offer affordable gearmotors, suitable for projects with limited budgets. In addition, Thanh Thai Motor has special policies and offers for dealers and bulk purchasers.

Quality Commitment

All 220V gearmotors here are wound with pure copper wire. This ensures powerful, smooth operation and energy savings.

Full Certification Documents: CO, CQ,...

All products such as integrated gearmotors, conveyor motors, or speed reducers come with full Certificates of Origin (CO) and Quality (CQ), meeting stringent technical requirements in industry.

Contact Us

Need advice on choosing the right gearmotor for your needs? Contact Thanh Thai Motor immediately using the methods below:

• WhatsApp: +84966596219
• Email: codienthanhthai@gmail.com