3-Phase 5.5kW 7.5Hp Gear Motor

The 3-Phase 5.5kW 7.5Hp Gear Motor (3-phase 5.5kW 7.5Hp gear motor) is a type of gear motor that is very popular in the market thanks to its high efficiency. In particular, the 3-phase gear motor series is often applied in equipment such as food mixers, goods transport conveyors, etc., helping to improve operating efficiency and optimize power consumption.

Overview of the 3-Phase 5.5kW 7.5Hp Gear Motor

The 3-Phase 5.5kW 7.5Hp Gear Motor, also known as an inline helical gear motor, this device is a perfect combination of two parts: the electric motor and the variable speed gearbox.

• 3-Phase 5.5kW 7.5Hp Electric Motor:
  • Function: Responsible for converting 3-phase alternating current into cyclic mechanical energy at the rotor rotating shaft with a standard rotational speed fluctuating around 1450 rpm.
  • Design: Thickly cast from technical gray cast iron, reinforced with heat dissipation ribs running along the body to accelerate the heat dissipation process into the environment.
• Gearbox:
  • Function: Acts as a mechanical energy transit station. It receives high motor speed from the motor, then through the gear ratio of the gear steps to slow down the output rotation speed, while maximizing the pulling force (torque) to overcome large resistance forces.
  • Design: Possesses an ultra-sturdy cast casing, capable of withstanding extremely large mechanical impact forces. The internal core assembly contains an alloy steel gear system that has undergone a carburizing heat treatment process to increase surface hardness.

Detailed internal structure of the 3-phase motor

The 3-Phase 5.5kW 7.5Hp Gear Motor is mainly composed of a gearbox and an electric motor, specifically a 3-phase electric motor. Among them:

• 3-Phase Electric Motor:
  • Stator is wound with 100% copper wire. The copper coil system meets Class F insulation standards, protecting the motor block against overcurrent and overheating phenomena.
  • Rotor is metal heat-treated at high temperatures to increase product durability.
• Gearbox: Consisting of various small and large gears assembled together. The purpose is to create torque and reduce the speed of the motor.
• Bearings and oil seals: Utilizing specialized deep groove ball bearings with exceptional axial compressive and transverse torsional strength.

Watch the detailed video about the 3-phase gear motor product:

Classification of the 3-Phase 5.5kW 7.5Hp Gear Motor

According to the installation type, the 3-Phase 5.5kW 7.5Hp Gear Motor is divided into the following 2 types:

Foot-mounted 3-Phase 5.5kW 7.5Hp Gear Motor

Technical specifications:

Application:

• Cement – Mining industry: Assembled for inclined feeding conveyor systems, stone crushers, bucket elevators for lifting ore and construction materials.
• Agriculture – Animal husbandry: Provides pulling force for milking machine chains, industrial-scale feed pellet presses, agricultural produce sorting conveyor systems.
• Environmental treatment and chemicals: Used for sludge agitators, industrial wastewater treatment systems.
• Packaging manufacturing industry: Smoothly operates the winding shaft of waste paper shredders, paper pulp grinders, large-format corrugated cardboard laminating systems.

Flange-mounted 3-Phase 5.5kW 7.5Hp Gear Motor

Technical specifications:

Application:

• Chemical – Fertilizer industry: Directly mounts brackets to the lid of thick chemical solution mixing tanks, microbial reaction settling tanks, plate and frame sludge filter press systems.
• Environmental – Wastewater industry: Integrated into surface sludge scraper assemblies, bottom oxygen aeration systems in industrial wastewater reservoirs.
• Food – F&B industry: Provides drive torque for large-capacity meat and fish mincing mortars, confectionery ingredient mixing tanks, thick syrup cooking tanks.

Guide to wiring the 3-phase gear motor

With a power level of 5.5kW, technicians need to accurately operate the position of the copper bars in the terminal box

• Terminal board access: Use a screwdriver tool to remove the cover of the terminal box located on the body of the gear motor.
• Contact pin positioning: Prepare 3 wires of the 3-phase power source and fix them directly to the 3-terminal cluster labeled U1, V1, and W1 respectively.
• Verification and evaluation: After tightening the cable, proceed to supply power to the motor to evaluate the startup status of the system.

Risk warning: Absolutely do not connect the power cable to the cluster of terminals U1, V2, and W2. Wrongly connecting this terminal system will create a 660V voltage configuration, immediately causing the motor to burn out completely.

The 3-Phase 5.5kW 7.5Hp Gear Motor with load capacity up to thousands of kilograms and monolithic cast mechanical structure brings absolute peace of mind for heavy-duty production lines. To view more diverse power ranges, we invite customers to watch the summary video made by the team of Thanh Thai Motor with a variety of electromechanical product lines such as gear motor videos, electric motors, gearboxes, water pumps, etc. making it easy for customers to choose the product line that suits their needs.

Warranty, Shipping, and Commitment Policies at Thanh Thai Motor

When purchasing gearmotors at Thanh Thai Motor, you will receive benefits such as:

Warranty up to 24 Months

All gearmotor products at Thanh Thai Motor come with an official 24-month warranty. We are committed to clear after-sales service, with quick and transparent processing procedures – ensuring customer peace of mind during use.

Nationwide Delivery

No matter which province or city you are in, Thanh Thai Motor is always ready to support fast delivery, ensuring on-time delivery, careful packaging, and safe transportation. We supply a full range of 220V gearmotors, variable speed motors, etc., for the diverse needs of customers nationwide.

Products Meet European Quality Standards with German Technology

Our products are manufactured using modern German technology, meeting European standards. Models such as integrated gearmotors, variable speed motors, or 220V gearmotors all ensure stable operation and superior durability.

Competitive Pricing, Good Discounts for Dealers and Bulk Purchasers

We offer affordable gearmotors, suitable for projects with limited budgets. In addition, Thanh Thai Motor has special policies and offers for dealers and bulk purchasers.

Quality Commitment

All 220V gearmotors here are wound with pure copper wire. This ensures powerful, smooth operation and energy savings.

Full Certification Documents: CO, CQ,...

All products such as integrated gearmotors, conveyor motors, or speed reducers come with full Certificates of Origin (CO) and Quality (CQ), meeting stringent technical requirements in industry.

Contact Us

Need advice on choosing the right gearmotor for your needs? Contact Thanh Thai Motor immediately using the methods below:

• WhatsApp: +84966596219
• Email: codienthanhthai@gmail.com