WPDO Gear Motor 175 7.5kW 10Hp

Thanh Thai Motor would like to introduce to customers a new product line, the WPDO Gear Motor 175 7.5kW 10Hp, which is commonly used in heavy-load factories, featuring diverse functions and powerful operation.

Design Overview of WPDO Gear Motor 175 7.5kW 10Hp

It is a gear motor formed by combining an electric motor with a gearbox, featuring a sturdy and durable outer casing made of cast iron or aluminum, coated with electrostatic paint on the outside to prevent color fading and minimize scratches during operation.

Detailed Structure of WPDO Gear Motor 175 7.5kW 10Hp

A worm gear motor is a device that reduces rotational speed; specifically, it is a 3-phase gear motor assembled from a 3-phase electric motor paired with a WPDO worm gearbox.

3-Phase Electric Motor 7.5kW 10Hp:

• The outer casing of the motor is made of pure cast iron or aluminum.
• Stator: Made of solid, high-tech copper, it is the stationary part.
• Rotor: Made of laminated silicon steel, it is the rotating part.
• A cooling fan is installed at the rear of the motor to cool it during operation.

WPDO 175 Worm Gearbox:

• The outer casing is made of durable cast iron, helping to limit rust and allowing operation in high-temperature environments.
• Worm gear and worm shaft: Internal components of the gearbox, heat-treated to increase hardness and ensure stable power transmission during operation.

Technical Specifications of WPDO Gear Motor 175 7.5kW 10Hp

The technical specifications below provide the basis for selecting, installing, and operating the equipment to suit practical requirements.

Technical Specifications of 3-Phase Electric Motor 7.5kW 10Hp

This set of parameters reflects the electrical characteristics and working capacity of the motor.

Technical Specifications of WPDO 175 Worm Gearbox

The mechanical parameters help determine the transmission characteristics and load-bearing capacity of the gearbox.

Common Applications of WPDO Gear Motor 175 7.5kW 10Hp

The WPDO Gear Motor 175 7.5kW 10Hp is a gear motor line above 3.7kW. Thanks to its large capacity, it is widely used in heavy-load factories such as:

• In large-scale wood pressing and asphalt pressing plants.
• Used in coal, metallurgy, or mineral processing plants.
• Used in production conveyor systems for bricks, stone, cement, iron, and steel.

How to Install WPDO Worm Gearbox onto 3-Phase Electric Motor

To ensure the drive system operates efficiently, the assembly of the WPDO gearbox with the 3-phase electric motor must be carried out according to the correct technical sequence.

Step 1: Preparation before installation

Check the gearbox, electric motor, key, bolts, and accompanying accessories. At the same time, clean the assembly locations to avoid affecting connection accuracy.

Step 2: Check suitability

Compare the motor shaft dimensions with the bore hole of the gearbox. Check the flange and connection points to ensure that the parts can be assembled smoothly.

Step 3: Install the motor into the gearbox

Insert the motor shaft into the bore hole in the correct direction, aligning the key and keyway to match. During operation, avoid heavy impacts on the shaft or flange. Users can refer to the gear motor video to follow the actual installation steps.

Step 4: Post-installation check

Tighten the fixing bolts evenly in sequence, then run the equipment test under no-load mode. Observe vibration, noise, and system performance before putting it into operation.In addition, referring to the comprehensive video on installation, operation, and maintenance will help users better understand how to use the WPDO gearbox in practice.