WPDX 155 Gear Motor 7.5kW 10Hp

The WPDX 155 Gear Motor 7.5kW 10Hp is a gear motor formed by combining an electric motor (3-phase electric motor) and a gearbox (worm gearbox). The device features a rigid structure, sturdy flange installation, and stable transmission.

Design overview of the WPDX 155 Gear Motor 7.5kW 10Hp

The worm gear motor features a sturdy design, stable transmission capability, and high mechanical durability. The housing of the entire device is cast from solid iron or high-grade alloy, coated with anti-rust electrostatic paint, helping the product remain durable, aesthetically pleasing, and corrosion-resistant.

The motor core is wound with 100% copper wire, ensuring good electrical conductivity, low heat generation, and energy saving. The motor shaft is made of hardened steel, capable of withstanding heavy loads, ensuring accurate and durable transmission over time.

Detailed structure of the gear motor

With a capacity of 7.5kW 10Hp, the product belongs to the gear motor segment above 3.7kW, designed with the following main components:

• Electric motor: A 3-phase electric motor 7.5kW 10Hp, operating stably, saving electricity, and suitable for heavy loads.
  • Outer casing: Made of sturdy cast iron or aluminum, minimizing damage from impact, externally coated with electrostatic paint to prevent rust and increase equipment lifespan.
  • Stator – Stationary part: Consists of pure copper coils wound around the core, which creates a strong magnetic field when current passes through, helping the motor run smoothly.
  • Rotor – Rotating part: Machined from high-quality engineering steel, helping to transmit torque accurately and reduce energy loss.
  • Cooling fan: Mounted at the rear of the motor, providing fast cooling and effective heat dissipation, allowing the equipment to operate continuously without overheating.

• WPDX 155 worm gearbox:
  • Gearbox housing: Monolithically cast, rigid, coated with anti-rust and anti-corrosion paint, which also enhances system aesthetics.
  • Worm shaft: Machined from hardened alloy steel, offering excellent load-bearing and wear resistance.
  • Worm gear: Made of pure copper, meshing precisely with the worm shaft, ensuring smooth operation and low noise.
  • Lubricating oil and oil seal: Equipped with pre-filled lubricating oil to reduce friction and ensure smooth operation; oil seals are installed to prevent oil leakage, supporting long-term stable working performance.

Technical specifications of the WPDX 155 7.5kW 10Hp motor

Looking up the mechanical dimensions of the WPDX 155 7.5kW gear motor system provides foundational data for synchronizing machinery details.

Technical specifications of the 3-phase electric motor 7.5kW 10Hp

Equipped with a powerful 10Hp capacity, this 3-phase electric motor operates smoothly and adapts well to industrial voltage fluctuations. The IP55 protection standard and Class F insulation class below demonstrate superior heat resistance and dust/water resistance when putting the machine into continuous operation.

Technical specifications of the WPDX 155 gearbox

Below are the detailed specifications of the WPDX size 155 gearbox

Practical applications of the WPDX 155 Gear Motor 7.5kW 10Hp

This 3 phase gear motor is widely applied in many industries, including:

• Installed in conveyor lines and heavy goods transportation belts.
• Mixers, agitators, and grinders in the food, chemical, and building materials industries.
• Used in packaging, filling, and labeling equipment in automated production lines.
• Winch systems, material lifting, lifting tables, or industrial doors.

Step-by-step guide on installing the WPDX gearbox with an electric motor

To protect the durability of the equipment, follow the WPDX coupling procedure below:

• Shaft end check: It is mandatory to select a motor and a gearbox with shaft diameter specifications that are completely compatible with each other.
• Proceed with coupling: Insert the motor shaft directly into the gearbox shaft, taking care to keep the two flange faces in uniform contact without warping.
• Tighten fixing screws: Complete the process by using screws to tightly secure all anchor positions on the flange to eliminate vibration forces during operation.

The WPDX 155 Gear Motor 7.5kW 10Hp integrates a copper alloy worm gear that meshes precisely with a hardened steel worm shaft, features an IP55 protection class, and combines with a fast heat dissipation cooling fan to help the motor run continuously across multiple shifts without worrying about thermal overload.

To observe the detailed mechanical structure and practical operating capabilities of the equipment, customers are cordially invited to refer to the compilation video of heavy-duty machine series or watch the gear motor video directly from Thanh Thai Motor.

Warranty, Shipping, and Commitment Policies at Thanh Thai Motor

When purchasing gearmotors at Thanh Thai Motor, you will receive benefits such as:

Warranty up to 24 Months

All gearmotor products at Thanh Thai Motor come with an official 24-month warranty. We are committed to clear after-sales service, with quick and transparent processing procedures – ensuring customer peace of mind during use.

Nationwide Delivery

No matter which province or city you are in, Thanh Thai Motor is always ready to support fast delivery, ensuring on-time delivery, careful packaging, and safe transportation. We supply a full range of 220V gearmotors, variable speed motors, etc., for the diverse needs of customers nationwide.

Products Meet European Quality Standards with German Technology

Our products are manufactured using modern German technology, meeting European standards. Models such as integrated gearmotors, variable speed motors, or 220V gearmotors all ensure stable operation and superior durability.

Competitive Pricing, Good Discounts for Dealers and Bulk Purchasers

We offer affordable gearmotors, suitable for projects with limited budgets. In addition, Thanh Thai Motor has special policies and offers for dealers and bulk purchasers.

Quality Commitment

All 220V gearmotors here are wound with pure copper wire. This ensures powerful, smooth operation and energy savings.

Full Certification Documents: CO, CQ,...

All products such as integrated gearmotors, conveyor motors, or speed reducers come with full Certificates of Origin (CO) and Quality (CQ), meeting stringent technical requirements in industry.

Contact Us

Need advice on choosing the right gearmotor for your needs? Contact Thanh Thai Motor immediately using the methods below:

• WhatsApp: +84966596219
• Email: codienthanhthai@gmail.com