Brake Motor 0.18kW 0.25Hp

The Brake Motor 0.18kW 0.25Hp is an electric motor equipped with an electromagnetic brake used in applications requiring sudden braking and complete stopping. Belonging to the electric motor segment under 3.7kW with a compact design, ease of use, and widespread application, it has become an important part of daily life.

What is the design of the Brake Motor 0.18kW 0.25Hp like?

This brake motor features an aluminum outer housing coated with blue paint, providing a pleasing aesthetic appearance and high durability for the product. At the rear of the motor is a cooling fan that reduces heat during operation, protected by a fan cover to prevent dust and external environmental impacts.

In particular, the motor is integrated with an electromagnetic brake system, helping the motor stop completely and quickly while ensuring operational safety. This guarantees safety for users when operating machinery.

Structure of the Brake Motor 0.18kW 0.25Hp

The device is composed of mechanical component assemblies combined with a magnetic braking system operating synchronously.

• Stator: Small-sized magnetic steel core, pure copper windings with Class F standard temperature-resistant insulation layer.
• Rotor: Micro squirrel-cage rotor, micro-dynamically balanced to prevent vibration during high-speed operation.
• Electromagnetic brake (also known as magnetic brake): The core component mounted at the rear of the shaft, including the magnetic coil, brake disc, and brake pads, responsible for locking the rotating shaft immediately when power is cut off.
• Bearing: Uses mini bearings with dust and water-resistant covers, pre-packed with permanent lubricating grease.
• Cooling fan: Plastic fan blades mounted right behind the brake assembly, responsible for blowing a cool airflow along the aluminum housing ribs.

What are the types of Brake Motor 0.18kW 0.25Hp?

The Brake Motor 0.18kW 0.25Hp line is divided into 4 speed segments, meeting the braking requirements of various mechanisms. Below are detailed technical specifications.

Brake Motor 0.18kW 0.25Hp 2-pole (2,800 – 3,000 rpm)

High-speed line, suitable for sweeping or pushing mechanisms requiring precise stopping at high RPM.

Technical specifications:

Code	63M
Shaft diameter	11mm
Keyway	4mm
Flange diameter	140mm
Weight	5 kg
Dimensions	260 x 130 x 170 mm
Mounting type	Foot mounted (B3), Flange mounted (B35, B5, B14)
Protection class	IP55
Insulation class	Class F

Practical applications:

• High-speed defective product rejection mechanism on automatic conveyor belts.
• Main spindle rotating thin edge-cutting blades requiring immediate braking.
• Fast automatic sliding doors at checkpoints.

Brake Motor 0.18kW 0.25Hp 4-pole (1,400 – 1,500 rpm)

Standard speed, most widely used thanks to stable traction and smooth braking stop without jerking.

Technical specifications:

Code	63M
Shaft diameter	11mm
Keyway	4mm
Flange diameter	140mm
Weight	kg
Dimensions	260 x 130 x 170 mm
Mounting type	Foot mounted (B3), Flange mounted (B35, B5, B14)
Protection class	IP55
Insulation class	Class F

Practical applications:

• Electronic component sorting conveyor belts requiring stopping at the exact picking position.
• Small-capacity quantitative filling and packaging machinery systems.
• Automatic product counting conveyor belts in pharmaceutical workshops.

What gearbox does the Brake Motor 0.18kW 0.25Hp combine with?

To change traction force and speed, technicians need to couple the 0.18kW brake motor with compatible mechanical gearbox transmission mechanisms.

• Aluminum housing worm gearbox: NMRV code size 030 or size 040, with super compact advantages and high aesthetics.
• Cast iron housing worm gearbox: WPA, WPS codes size 40 or size 50 specialized for mini lifting winch systems.
• Mini helical gearbox: Small-sized inline and right-angle shaft lines used for high-precision automation production lines.

Wiring guide for brake motor

The 3-phase motor with magnetic brake uses an electromagnetic brake to hold the shaft when stopping the machine. When wiring, the diagram must be followed correctly to avoid misconnection between the motor section and the brake circuit.

Step 1: Check specifications

Check the specifications on the motor nameplate including voltage, power, and rated current. For a motor with magnetic brake, it is necessary to check the brake coil voltage additionally to select a suitable power supply. You can open the electric motor video to see how to read specifications and identify main parameters on the motor.

Step 2: Open terminal box

Remove the terminal box cover to observe the internal wire ends. This area typically contains stator wires, power supply terminals, and the rectifier for the magnetic brake system.

Step 3: Identify wire ends

Based on the motor wiring diagram, identify U, V, W terminals and terminals related to the brake circuit. Do not wire when the function of each terminal is not clearly identified.

Step 4: Connect power wires

Connect the power wires to terminals U, V, W according to the diagram. After wiring, recheck the wire tightening points and contacts to avoid looseness or poor contact.

Step 5: Check operation

Supply power and monitor motor operation as well as magnetic brake operation. If the brake does not release or the motor runs unstably, check the connections and power supply again.

In addition to the wiring section, you can access the video synthesis section of Thanh Thai Motor. This is a page containing a lot of content about electric motors categorized into groups such as inspection, repair, and equipment operation, rather than standalone wiring instruction content.

Warranty, shipping and commitment policy at Thanh Thai Motor

Warranty up to 24 months

All electric motor products distributed by Thanh Thai Motor are covered by a genuine warranty for up to 24 months. Customers who purchase electric motors can completely rest assured with a transparent, fast, and professional after-sales policy.

Nationwide Shipping

Thanh Thai Motor supports nationwide shipping for all electric motors sold, ensuring safe and on-time delivery to every province across the country. Whether you are in the North, Central, or South, we are ready to serve you.

European Standard Quality – German Technology

Thanh Thai Motor sells electric motors manufactured with German technology, meeting European quality standards, ensuring durability, high efficiency, and stable operation for a long period – suitable for the strict requirements of industrial electric motors.

Competitive Prices – Attractive Offers for Dealers and Wholesale Customers

We commit to reasonable motor prices, offering the best electric motor products with high discount policies for bulk purchasers and distribution units. The more you buy – the better the profit.

Quality Commitment – Powerful Operation, Power Saving

Thanh Thai Motor sells electric motors wound with 100% copper wire, helping the machine run powerfully, consume less electricity, operate smoothly, and effectively reduce vibration – extending equipment lifespan. When purchasing an electric motor, prioritizing products with 100% copper core will be a wise decision, bringing long-term value.

At Thanh Thai Motor, we provide a full range of products, with various phases and capacities, such as:

• 220V electric motors (or 220V 1-Phase electric motors) are 1-Phase electric motors commonly chosen for many household appliances and light industrial equipment, offering convenience and efficiency.
• 380V electric motors are 3-Phase electric motors using three-phase power, commonly used in heavy industrial applications.

Full CO, CQ Certification Documents

Thanh Thai Motor provides the best quality electric motors. Each imported electric motor product from Thanh Thai Motor comes with a Certificate of Origin (CO) and a Certificate of Quality (CQ), meeting the requirements for large projects, constructions, and strict technical documentation.

Contact for Purchase

Do you need to buy an electric motor or seek advice on choosing an affordable electric motor that suits your needs? Contact Thanh Thai Motor immediately using the methods below:

• WhatsApp: +84966596219
• Email: codienthanhthai@gmail.com