Worm Gearbox WPDX 80

The WPDX 80 Worm Gearbox is a specialized gearbox series featuring a right-angle input and output shaft design, suitable for drive systems requiring high torque and slow rotational speeds. The product stands out for its high mechanical durability, stable operation with a design directly mounted to a 3 phase motor, and exceptional service life.

This is an ideal choice for mechanical, manufacturing, and industrial automation applications. Let’s learn more details about this gearbox product with Thành Thái Motor through the article below.

Overview design of the WPDX 80 Worm Gearbox

The WPDX 80 gearbox features a solid cast iron outer housing coated with anti-rust electrostatic paint, helping protect the equipment in humid or chemical environments. The right-angle design of the input and output shafts helps optimize installation space and provides flexibility in various machinery layouts.

The worm gearbox combines directly with the electric motor to form a complete gear motor. With a synchronous structure that is easy to replace or connect, it helps save installation time and costs. It helps optimize transmission efficiency and reduce power loss during operation.

Internal structure of the WPDX worm gearbox

Inside the WPDX 80 is a mechanical transmission assembly between the worm shaft and worm gear with an industrial-standard structure:

• Worm shaft: Made from hard alloy steel, rust-resistant, high-load bearing, and ensures stable operation over a long period.
• Worm gear: Machined from copper alloy to increase moderate friction, transmit force efficiently, and reduce wear.
• Meshing component: Calculated precisely between the worm shaft and worm gear, ensuring smooth transmission and limited noise.
• Bearings and oil seals: Arranged tightly to prevent oil leakage and enhance sealing capacity in harsh working environments.

Technical specifications of the WPDX 80 Worm Gearbox

Below are the technical specifications of the WPDX 80 Worm Gearbox, including shaft diameter parameters and dimensions that can be mounted with a 3-phase electric motor 1.1kW 1.5Hp, 3-phase electric motor 1.5kW 2hp.

Applications of the WPDX 80 Worm Gearbox

The WPDX 80 Worm Gearbox has high applicability in many fields, especially:

• Heavy industry: Installed for conveyors, winches, mixers, rolling machines, presses, crushers, etc.
• Food and packaging industry: Used for packaging machines, textile machines, printing machines, material mixers, etc.
• Water treatment and environmental industry: Attached to stirrer systems, metering pumps, industrial water purifiers.
• Precision mechanics and CNC: Used in lathe systems, milling machines, laser cutting machines, etc.
• Civil equipment: Industrial car washers, door lifting systems.

Instructions for adding oil to the worm gearbox

Adding oil correctly helps the WPDX worm gearbox operate stably, reduces friction between the worm shaft and worm gear, limits wear, and extends the service life of the transmission assembly. Below are the technically correct oil adding steps recommended by Thành Thái Motor:

• Step 1 – Disconnect power and clean the oil adding area: Turn off the power, wait for the gearbox to cool completely, and wipe away dirt around the oil filler plug to prevent impurities from entering inside.
• Step 2 – Open the oil filler plug: Remove the oil filler plug on top of the gearbox, and check the condition of the filler hole and sealing gasket.
• Step 3 – Add the correct type of lubricating oil: Slowly pour lubricating oil according to the recommended type and viscosity for the WPDX gearbox, avoiding pouring too quickly to cause foaming.
• Step 4 – Check oil level: Observe the oil sight glass or oil level check hole, only fill to the standard level, do not overfill to avoid pressure increase and oil leakage during operation.
• Step 5 – Close tightly and check after filling: Tighten the oil filler plug, wipe clean any oil adhering to the outside, then run the gearbox at no load for a few minutes and recheck for leakage before putting it into use.

• 

The WPDX 80 Worm Gearbox with its right-angle input and output shaft design not only helps save installation space in production lines but also allows machinery to achieve slow rotational speeds with extremely large pulling force – something that conventional gearboxes can hardly meet.

In addition, Thành Thái Motor’s gearbox video warehouse and compilation videos will bring a lot of visual content about electric motor, gearbox, and water pump product lines, making it easy to follow and apply.

Warranty, Shipping, and Commitment Policy at Thanh Thai Motor

When purchasing gearboxes at Thanh Thai Motor, you will receive benefits such as:

Warranty up to 24 months

Gearbox products at Thanh Thai Motor are covered by a genuine warranty for up to 24 months. Customers can be completely confident in using them with a clear, transparent, and prompt after-sales policy.

Nationwide Delivery

We support fast delivery to all provinces and cities nationwide. Wherever you are, products are guaranteed to arrive on time and safely.

Products meeting European quality standards with German technology

Gearboxes at Thanh Thai Motor are manufactured using advanced German technology, meeting European quality standards. Ensuring high durability and stable operation for extended periods.

Competitive prices, good discounts for dealers and bulk customers

Reasonable prices, many attractive offers for wholesale buyers and distribution agents. The more you buy, the higher the discount – optimizing profits for customers.

Full certification documents: CO, CQ,...

Each product comes with full Certificate of Origin (CO) and Certificate of Quality (CQ). This provides assurance for customers when using them in projects or constructions requiring technical documentation.

Contact for Purchase

Do you need advice on choosing the right gearbox for your needs? Contact Thanh Thai Motor immediately using the methods below:

• WhatsApp: +84966596219
• Email: codienthanhthai@gmail.com