Worm Gearbox WPA 250

Worm Gearbox WPA 250 is designed with a right-angle output shaft relative to the input shaft, providing maximum flexibility during installation and operation. As a key device in manufacturing plants, the WPA 250 boasts a durable structure and competitive pricing. This gearbox not only optimizes transmission efficiency but also ensures high reliability throughout operation, effectively meeting the demands of various industrial applications.

Overview design of Worm Gearbox WPA 250

The outer casing of the worm gearbox is made of cast iron, then undergoes precision mechanical processing to achieve standard dimensions. The internal worm shaft is made of high-friction resistant steel, ensuring stability and long service life during operation. The worm wheel is made of pure copper, helping to minimize friction and wear during use.

To protect the equipment from environmental impacts, the WPA worm gearbox is coated with green oil-based paint. On the top of the gearbox, there is an oil filler cap, and at the bottom, an oil sight hole, allowing users to easily check the internal oil level.

To achieve optimal operating performance, Worm Gearbox WPA 250 needs to be connected to an electric motor. This combination allows for reducing rotational speed and increasing torque, ensuring stable and smooth equipment operation. Thanks to its durable design, the WPA 250 together with the electric motor forms a powerful gear motor, effectively meeting the rigorous requirements in industrial applications.

Internal structure of Worm Gearbox WPA 250

The WPA 250 gearbox is equipped with a gear system designed to mesh perfectly, ensuring the output rotational speed is precisely adjusted according to application requirements.

Inside the 1-Stage worm gearbox WPA 250, the worm shaft is made of stainless steel, providing wear resistance and long service life. The worm wheel is made of copper, a material with low friction characteristics. To generate the necessary torque and effectively reduce rotational speed, these gears are designed to mesh with high precision.

Technical specifications of Worm Gearbox WPA 250

The technical specifications of the Worm Gearbox WPA 250 are summarized below, including information on dimensions, input shaft diameter, output shaft diameter, and basic parameters for equipment selection and installation.

Applications of Worm Gearbox WPA 250

With optimal dimensions and high performance, Worm Gearbox WPA 250 is widely applied in various manufacturing sectors, including:

• Mining industry: Used in coal and sand mining machinery, supporting material transportation and processing.
• Pharmaceutical industry: Applied in herbal medicine production, requiring precision and stability during mixing and agitation.
• Handicraft production: Used in fine art machinery, helping to delicately control speed and force.
• Food processing: Applied in fruit juice extractors, ensuring efficient and rapid pressing.

Guide on how to fill oil for WPA worm gearbox

• Step 1: Locate the oil filling position: Unscrew the yellow oil filler cap on top of the gearbox (the position indicated by the arrow in the picture).
• Step 2: Check and drain old oil (if any): When changing oil periodically, unscrew the oil drain plug at the bottom of the gearbox to completely drain the old oil before adding new oil.
• Step 3: Fill new oil to the correct level: Pour industrial lubricant oil (typically viscosity VG220 to VG320) into the oil filler hole. Check the oil level through the oil sight glass on the side of the gearbox, ensuring the oil reaches about 1/2 to 2/3 of the glass sight, then stop and tighten the yellow cap.

Worm Gearbox WPA 250 is an effective choice for many industrial applications, especially in confined installation spaces. You can also refer to the gearbox video to observe in detail the structure, operating principles, and practical working capabilities of the product. In addition, the summary video produced by Thanh Thai Motor will provide customers with more useful information about transmission equipment lines, operation instructions, and maintenance. For detailed consultation and selection of the appropriate solution, please contact Thanh Thai Motor immediately. We are always ready to provide quality products along with dedicated support services.

Warranty, Shipping, and Commitment Policy at Thanh Thai Motor

When purchasing gearboxes at Thanh Thai Motor, you will receive benefits such as:

Warranty up to 24 months

Gearbox products at Thanh Thai Motor are covered by a genuine warranty for up to 24 months. Customers can be completely confident in using them with a clear, transparent, and prompt after-sales policy.

Nationwide Delivery

We support fast delivery to all provinces and cities nationwide. Wherever you are, products are guaranteed to arrive on time and safely.

Products meeting European quality standards with German technology

Gearboxes at Thanh Thai Motor are manufactured using advanced German technology, meeting European quality standards. Ensuring high durability and stable operation for extended periods.

Competitive prices, good discounts for dealers and bulk customers

Reasonable prices, many attractive offers for wholesale buyers and distribution agents. The more you buy, the higher the discount – optimizing profits for customers.

Full certification documents: CO, CQ,...

Each product comes with full Certificate of Origin (CO) and Certificate of Quality (CQ). This provides assurance for customers when using them in projects or constructions requiring technical documentation.

Contact for Purchase

Do you need advice on choosing the right gearbox for your needs? Contact Thanh Thai Motor immediately using the methods below:

• WhatsApp: +84966596219
• Email: codienthanhthai@gmail.com