TECO Water Pump 4kW 5.5Hp

TECO Water Pump 4kW 5.5Hp is a centrifugal water pump line widely and commonly applied in industrial factories, crop cultivation, and irrigation systems. Thanh Thai Motor will provide you with further necessary information about this product.

General design of TECO Water Pump 4kW 5.5Hp

The water pump (water pump motor) belongs to the 3-phase water pump line with a structure consisting of 2 main parts: the pump head and the pump body, which is an electric motor (electric motor), specifically a 3-phase electric motor:

• The main pump body part of the TECO water pump is a 3-phase 4.0kW 5.5Hp electric motor made of aluminum or cast iron, with the motor material depending on customer requirements.
• The pump head is an important part of the water pump, responsible for drawing water from wells/ponds/lakes and discharging it upward.

Structure of TECO Water Pump 4kW 5.5Hp

TECO Water Pump 4kW 5.5Hp features an extremely compact close-coupled centrifugal design with optimized standard dimensions without compromising durability, thanks to a precision mechanical structure consisting of two core parts:

• Motor components:
  • Motor housing: Optional aluminum material (fast heat dissipation, lightweight suitable for transportation) or cast iron (strong impact resistance, environmental corrosion resistance). The housing meets IP55 protection standards for effective dust and splash water resistance.
  • Forced cooling system: The cooling fan at the rear of the motor continuously blows cool air along the heat-dissipation fins on the machine body.
  • The rotor is the rotating part made of laminated steel sheets, and the stator is the stationary part wound with 100% pure copper wire, delivering outstanding operating efficiency.
• Pump head components include: Connecting shaft between motor, inlet flange, rubber gasket, impeller, mechanical seal, suction pipe, and discharge pipe.

Specifications of TECO Water Pump 4kW 5.5Hp

TECO Water Pump 4kW 5.5Hp with a water flow rate of 9.4-53.6 m3/h belongs to the water pump line over 50m3/h, with dimensions: 502.5mm*325mm*312mm. Below is the technical specification table for this pump line:

Applications of TECO 5.5 HP water pump

Nowadays, 3-phase water pumps are motors trusted and used by businesses and gardeners alike in their production processes.

• For orchards with large cultivation areas, choosing a water pump above 3.7kW is an extremely reasonable choice, because with a strong pumping capacity, it easily carries out crop irrigation in a short time, especially during the dry season.
• For residential households with large water tanks and reservoirs, using the TECO Water Pump 4kW 5.5Hp is very logical, as it can handle a very large volume of water in a short time, ensuring a stable domestic water supply.
• For industrial factories, the role of this pump goes without saying, as it is an indispensable factor in the water pumping process to operate the factory’s production lines.

Decoding the parameters on the TECO water pump nameplate

To help Thanh Thai Motor’s customers easily read and understand pump specifications, we explain the meanings of basic symbols commonly written on the nameplate as follows:

• Output (power): Indicates the power of the motor in kW or HP (horsepower); the higher this index, the stronger the pump operates.
• Poles: Determines the rotational speed of the motor; this parameter is directly related to the operating capability of the machine.
• Volts & Amp’s (voltage and current): The input power source level and rated current required for the machine to operate stably, avoiding short-circuit and burning conditions.
• R.p.m (rotational speed): The number of revolutions of the shaft per minute, an important factor affecting the water flow rate and discharge pressure.
• Ip (protection index): Evaluates the ability to resist dust and water penetration into the motor housing.

TECO Water Pump 4kW 5.5Hp is very easy and simple to install, thereby creating a comfortable and pleasant mindset for users when purchasing the TECO Water Pump 4kW 5.5Hp. The machine is wound with 100% copper wire, creating sturdiness for the product and making transportation as well as machine operation safe.

In addition, watching water pump videos and compilation videos will help you fully access information about the appearance, structure, and technical specifications of each pump line.

Warranty, Shipping, and Commitment Policy when purchasing water pumps at Thanh Thai Motor

Up to 24-month warranty for water pumps

All water pump lines supplied by Thanh Thai Motor come with an official warranty of up to 24 months. We are committed to providing fast, transparent, and professional warranty support – ensuring complete peace of mind for customers during use.

Nationwide Delivery – Fast and Secure

We offer nationwide delivery, ensuring that pumps are carefully transported and delivered on schedule to customers in all provinces and cities across the country. From Hanoi, Da Nang to Ho Chi Minh City or industrial zones – Thanh Thai Motor is always ready to serve.

Advanced Technology – European Standard

All water pump lines at Thanh Thai Motor are manufactured with German technology, meeting European standards, ensuring high durability, stable operation, power saving, and suitability for many demanding environments such as construction sites, agriculture, manufacturing plants, etc.

Competitive Prices – Attractive Offers for Dealers, Wholesale Customers

We offer reasonable and the most competitive prices in the market. We also have a high discount policy for bulk purchasers, project customers, and long-term distribution partners.

Quality Commitment – Powerful Pump, Energy Saving

All pumps are constructed with 100% copper windings, ensuring powerful operation – low power consumption – minimal vibration – less heating, smooth and durable performance over time. Thanh Thai Motor only sells genuine products – we say no to counterfeit and low-quality goods.

Full CO, CQ Certificates

Each product comes with a Certificate of Origin (CO) and a Certificate of Quality (CQ) – fully meeting the requirements for construction projects, acceptance documents, and engineering projects.

Contact for Consultation & Water Pump Orders

Do you need consultation on choosing the right water pump for your home, construction project, or factory?

Contact Thanh Thai Motor immediately:

• WhatsApp: +84966596219

• Email: codienthanhthai@gmail.com