Lepono XKm50-1 High Head Water Pump 0.11kW 0.15Hp

Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP is an outstanding water pump product from the LEPONO brand, designed with advanced technology to deliver maximum efficiency in lifting water to high elevations. With powerful capacity and durable operating capability, it is a top-choice high head water pump for domestic water supply, irrigation, or water provision in construction projects and industrial zones.

Overall Design of the Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP

The Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP features a compact design, making it easy to install in various spaces. The pump housing is made of high-quality cast iron or aluminum, helping to resist corrosion and protect internal components. This design not only ensures aesthetic appeal but also increases durability, allowing the pump to operate long-term without being affected by external environmental impacts.

The high head water pump is equipped with a powerful electric motor, capable of stable operation over long periods. Internal components such as the pump shaft and impeller are manufactured with high precision, optimizing working efficiency and minimizing issues during use.

Structure of the Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP

The Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP is a 1-phase water pump equipped with the following main components:

• Electric Motor: A 1-phase electric motor with a power of 0.11kW equivalent to 0.15Hp, providing sufficient power to pump water to high elevations without consuming excessive electricity. This 0.11kW 0.15Hp 1-phase electric motor operates smoothly, stably, and with minimal noise.
• Pump Shaft: Made from sturdy, durable material capable of withstanding high loads, helping the pump operate continuously without rapid wear and tear.
• Impeller: Specially designed to optimize the water pumping process, allowing the water flow to reach maximum levels while maintaining high working efficiency.
• Pump Housing: Made from rust-resistant cast iron or aluminum, capable of withstanding high temperatures and protecting internal components from external environmental impacts.

Technical Specifications of the Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP

The Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP with a water flow rate of 1.8 m3/h belongs to the water pump line under 50m3/h, widely used thanks to many advantages. Below is the specification table for this pump series:

Applications of the Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP

The Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP is designed to serve various water pumping needs, including:

• The Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP is ideal for supplying water to households, especially in areas with water sources from deep wells.
• Used in irrigation systems for orchards, farms, or cultivation areas, ensuring an adequate water supply for crops.
• The Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP can be used for small-scale production workshops utilizing 1-phase electricity.

Decoding the Parameters on Lepono Water Pump Nameplates

Mastering the general parameter structure on the nameplate not only helps you purchase the right pump but also assists in troubleshooting during malfunctions, specifically as follows:

• Model/Serial: Must be provided immediately to technicians when you want remote repair consultation.
• Flow Rate (Q.max): If the discharged water is much less than this parameter, the pipeline may be clogged or leaking.
• Head (H.max): If the pump runs but water does not reach the high floor, you may have purchased a pump with a head lower than your house’s actual height.
• Suction Depth (Suct.): When the underground tank level drops beyond this parameter, the pump will run dry (no-load), easily causing seal burnouts.
• Voltage (V): If the supplied voltage is lower than the parameter recorded on the nameplate, the motor will hum, overheat, and trip the thermal relay.
• Power (KW/HP): Used with a clamp meter to measure the actual current and check for overload compared to the design.
• Phase Type (Mot): Incorrect phase connection (especially with 3-phase power) will cause the pump to rotate in reverse, failing to pump water.
• Pipe Size (Size): If the pipe reduction is much smaller than the pump’s standard size, the pump will experience pressure buildup and wear out quickly.
• Speed (r.p.m): If the rotational speed drops, the bearing might be jammed or the capacitor may have issues.

Not only providing the Lepono XKm50-1 High Head Water Pump 0.11kW 0.15HP, Thanh Thai Motor also diversifies other products such as: electric motors, gear motors, gearboxes, air blowers, variable frequency drives, vacuum pumps, and other specialized accessories like brakes, pulleys, and couplings. With these products, the company is committed to fully meeting the requirements for power, flow rate, head, and output speed for all customers, from basic to complex demands.

To make the selection process more convenient, please refer to the water pump videos and summary videos of Thanh Thai Motor to directly view the design, specifications, and characteristics of each product line.

Warranty, Shipping, and Commitment Policy when purchasing water pumps at Thanh Thai Motor

Up to 24-month warranty for water pumps

All water pump lines supplied by Thanh Thai Motor come with an official warranty of up to 24 months. We are committed to providing fast, transparent, and professional warranty support – ensuring complete peace of mind for customers during use.

Nationwide Delivery – Fast and Secure

We offer nationwide delivery, ensuring that pumps are carefully transported and delivered on schedule to customers in all provinces and cities across the country. From Hanoi, Da Nang to Ho Chi Minh City or industrial zones – Thanh Thai Motor is always ready to serve.

Advanced Technology – European Standard

All water pump lines at Thanh Thai Motor are manufactured with German technology, meeting European standards, ensuring high durability, stable operation, power saving, and suitability for many demanding environments such as construction sites, agriculture, manufacturing plants, etc.

Competitive Prices – Attractive Offers for Dealers, Wholesale Customers

We offer reasonable and the most competitive prices in the market. We also have a high discount policy for bulk purchasers, project customers, and long-term distribution partners.

Quality Commitment – Powerful Pump, Energy Saving

All pumps are constructed with 100% copper windings, ensuring powerful operation – low power consumption – minimal vibration – less heating, smooth and durable performance over time. Thanh Thai Motor only sells genuine products – we say no to counterfeit and low-quality goods.

Full CO, CQ Certificates

Each product comes with a Certificate of Origin (CO) and a Certificate of Quality (CQ) – fully meeting the requirements for construction projects, acceptance documents, and engineering projects.

Contact for Consultation & Water Pump Orders

Do you need consultation on choosing the right water pump for your home, construction project, or factory?

Contact Thanh Thai Motor immediately:

• WhatsApp: +84966596219

• Email: codienthanhthai@gmail.com