Mini Gear Motor 180W

Mini Gear Motor 180W (mini gear motor 180w) is designed and assembled with small parts and an aluminum housing, creating a compact product that is easy to transport. The gear motor also has many outstanding advantages for applications in production processes, industries, or commercial households.

Design overview of the mini gear motor 180W

The mini gear motor features an outer aluminum housing with very light weight, and the exterior is coated with an anti-rust and anti-corrosion paint over time to protect the internal body of the motor.

The core of the motor is made of 100% pure copper without impurities, which helps the machine operate more efficiently.

The rear of the mini gear motor is designed with a cooling fan. During operation, the fan rotates to generate airflow for heat dissipation of the motor body, and the fan cover protects the fan from collisions or impacts during operation.

Internal structure of the gear motor

The gear motor under 1.1kW consists of an electric motor (1-phase electric motor or 3-phase electric motor) and a gearbox. The entire stator winding uses 100% high-purity copper wire without impurities for excellent heat resistance, and the cooling fan also plays a part in heat dissipation for the motor during operation.

• Drive system (Electric motor): The stator core uses 100% high-standard pure copper wire, providing excellent heat resistance and superior voltage drop resistance compared to aluminum-clad wires. The magnetic steel rotor core is dynamically balanced on a computer machine, combined with heavy-duty industrial bearings for smooth shaft rotation and elimination of rattling noises when powered on.
• Transmission system (Gearbox): The gearbox housing encloses super-hard alloy steel gear pairs, meticulously milled for absolute mechanical meshing.

Classification of mini gear motor 180W

Thanh Thai Motor provides the 180W model with three specific shaft end standards. This variety of mounting methods helps machine builders optimize space and eliminate intermediate details.

Foot-mounted inline shaft mini gear motor 180W (IKR)

The foot-mounted inline shaft version IKR features a coaxial design, providing direct and stable transmission to the terminal device. This is a suitable choice for various machinery systems requiring simple installation, easy maintenance, and durable operation.

Technical specifications:

Practical applications:

• Food processing industry: Applied to drive automatic spring roll grilling lines, plastic basket transfer conveyors in drying workshops.
• Harvesting agriculture industry: Applied to run rice hulling roller systems, small-scale livestock feed mixers.
• Automated packaging industry: Applied to drive the raw material hopper assembly on tea bag or powdered coffee packaging machines.

Right-angle hollow shaft mini gear motor 180W (RH)

The right-angle hollow shaft series RH is designed to optimize installation space and facilitate connection with the load shaft through a hollow shaft structure. Thanks to its compact design, the product is suitable for many modern production lines and automation equipment.

Technical specifications:

Practical applications:

• Industrial textile industry: Applied to tension yarn rolls, operate conveyors of automatic fabric spreading sewing machine systems.
• F&B equipment industry: Applied to rotate the shaft of cream display glass cabinets, supermarket rotary bread baking ovens.
• Medical equipment industry: Applied to run pill blister sorting conveyor systems, bottle feeding in clean rooms.

Right-angle solid shaft mini gear motor 180W (RA)

The right-angle solid shaft mini gear motor 180W (RA) uses a convex output shaft, allowing flexible connection with various transmission mechanisms. This design makes assembly convenient and well meets applications requiring a 90-degree change in transmission direction.

Technical specifications:

Practical applications:

• Civil construction industry: Applied to manufacture light-load construction material winches, automatic sliding gate motors.
• Aquaculture industry: Applied to rotate plastic paddle wheel aerators to create water currents and aeration foam for shrimp pond bottoms.
• Industrial chemical industry: Applied as a motor attached to agitator blades to evenly mix chemicals and water-based paints in 50-liter stainless steel tanks.

No-load amp measurement process for mini gear motor

To inspect the performance and stability of the 1-phase mini gear motor before putting it into the load-bearing line, checking the consumed current is mandatory. Below is the technical standard operation guide consisting of 3 stages:

• Step 1: Set up no-load operation status: Supply power to the controller to start the motor. Let the equipment run idle (without load) and prepare specialized measuring equipment, which is a clamp meter (digital clamp meter).
• Step 2: Clamp current and isolate signal interference: Open the jaws of the measuring device and clamp around only a single power cord supplying electricity to the motor. The most important technical note in this step is never to clamp 2 or more power cables together at the same time, because the cross-magnetic field cancellation will completely distort the displayed amperage ratio.
• Step 3: Wait for stability and read acceptance parameters: Keep the clamp meter in position for about 2 – 3 seconds to eliminate errors caused by starting current, and wait until the reading on the electronic screen stops jumping. If the measured result is maintained at 0.35 – 0.36A, this confirms that the motor has accurate power consumption, the internal copper winding meets quality standards, and it is ready for load installation.

With advantages in small size, lightweight, and stable working capability, the mini gear motor 180W is a suitable solution for many transmission systems requiring low speed and high torque. Understanding technical specifications carefully and choosing the right configuration will help the equipment maximize its usage efficiency as well as extend its operating lifespan.

If you need more practical information about the structure, installation methods, or applications of the product, you can refer to the summary video and gear motor videos shared by Thanh Thai Motor to get a visual perspective and make a choice that suits your needs.

Warranty, Shipping, and Commitment Policies at Thanh Thai Motor

When purchasing gearmotors at Thanh Thai Motor, you will receive benefits such as:

Warranty up to 24 Months

All gearmotor products at Thanh Thai Motor come with an official 24-month warranty. We are committed to clear after-sales service, with quick and transparent processing procedures – ensuring customer peace of mind during use.

Nationwide Delivery

No matter which province or city you are in, Thanh Thai Motor is always ready to support fast delivery, ensuring on-time delivery, careful packaging, and safe transportation. We supply a full range of 220V gearmotors, variable speed motors, etc., for the diverse needs of customers nationwide.

Products Meet European Quality Standards with German Technology

Our products are manufactured using modern German technology, meeting European standards. Models such as integrated gearmotors, variable speed motors, or 220V gearmotors all ensure stable operation and superior durability.

Competitive Pricing, Good Discounts for Dealers and Bulk Purchasers

We offer affordable gearmotors, suitable for projects with limited budgets. In addition, Thanh Thai Motor has special policies and offers for dealers and bulk purchasers.

Quality Commitment

All 220V gearmotors here are wound with pure copper wire. This ensures powerful, smooth operation and energy savings.

Full Certification Documents: CO, CQ,...

All products such as integrated gearmotors, conveyor motors, or speed reducers come with full Certificates of Origin (CO) and Quality (CQ), meeting stringent technical requirements in industry.

Contact Us

Need advice on choosing the right gearmotor for your needs? Contact Thanh Thai Motor immediately using the methods below:

• WhatsApp: +84966596219
• Email: codienthanhthai@gmail.com